LDR25K1 3km Laser Target Designator Module (25mJ)

LDR25K1 · 1064 nm laser ranging and designation system

LDR25K1 is listed in ERDI's 1064 nm ranging and designation family. Product-specific values, conditions and documents are shown only where they are bound to this model's controlled record.

Technical Downloads

Use the current controlled document revision for design review. Confirm the ordered connector and mechanical configuration before release.

• PDF Datasheet — LDR25K1 — verified product specification (.pdf)
• 1064 nm Systems Catalog (EN) — full family catalogue (.pdf)
• 3D model — the controlled STEP source is released on request. Contact us with your integration requirement.

Detailed LDR25K1 Specifications

The tables below retain the supplied model record. A value, option or condition from another model is not interchangeable.

Interface and pin definitions

Application context

Application labels indicate evaluation context, not automatic fitness for a finished system.

The controlled LDR25K1 PDF describes coded laser designation and laser ranging for target illumination of terminally guided weapons. It separately lists target laser designation for air-to-ground guided weapons.

This context is bound only to the controlled LDR25K1 document; end-system suitability and acceptance remain subject to engineering review.

INTEGRATION CHECK

Model-specific conditions and limits

Conditions are retained only when the source states them. They are not reconstructed from a nominal range or wavelength.

FAQ

Is 1064 nm visible to the eye? It is infrared rather than ordinary visible light. Absence of a visible beam does not indicate absence of emission or hazard. Do not use visual appearance as an exposure assessment.

Does the wavelength determine the laser class? No. Product classification depends on accessible emission and the relevant assessment conditions. The wavelength is one input, not a classification certificate.

Does pulse energy describe electrical consumption? No. Pulse energy is optical energy per pulse. Supply consumption is an electrical quantity and belongs to its own operating condition in the model documentation.

Are accuracy and resolution interchangeable? No. A reporting increment is not a bound on measurement error. Read each field under its own definition and test conditions.

Can full-angle and half-angle divergence be compared directly? Not without identifying the convention. If the released record does not state it, request the measurement definition rather than silently choosing one.

Can the best figures from different operating modes be combined? No. A rate, duration or stability condition belongs to the mode to which it is assigned. Combining unrelated conditions creates a new, unsupported specification.

Does a cited standard prove certification? No. A citation identifies a framework or test method. Certification or completed qualification needs the relevant report and an explicit statement of the assessed product configuration.

What does a “typical” value mean here? It describes the source record’s representative value, not a newly guaranteed upper or lower limit. A typical entry must remain labeled typical.

Can storage temperature be used as the operating range? No. Non-operating storage and powered operation are different states. Preserve both entries and their qualifiers.

Does a reference paper establish this product’s internal material or design? No. General laser physics is not a bill of materials. Internal materials and construction require a controlled model source.

What should happen when a source unit or field is incomplete? Leave the uncertainty visible and obtain a corrected controlled document. Do not infer a missing unit, test condition or option from the product name.

Where are the sources for this page? The Technical Downloads area contains the model document. The bibliography separates product evidence from general standards and safety information; neither replaces a unit-specific test record.

ENGINEERING REFERENCES

Content aligned with the ERDI 1064 nm product documentation for LDR25K1. Request the controlled PDF and STEP model for design release.